How to Complete the D-Link DAP-1620 Setup Step-by-Step?
The DAP-1620 belongs to the AC1200 wifi range extender family and is used to extend the wifi signals of your existing wifi router. With the new AC technology, you can enjoy a wireless connection of up to 1200 Mbps and the latest 802.11AC wireless technology. However, to enjoy the diverse functionalities of this networking device, the D-Link DAP-1620 Setup is a must. Similarly, this guide sheds light on providing you with quick insights into the extender setup process in an easy manner. Let’s walk through this guide!
Initiating the D-Link DAP-1620 Wi-Fi Range Extender Setup
Before you initiate the D-Link DAP-1620 Setup process, there are some important things you should take into account. First of all, you must have a stable wifi connection, accurate wifi SSID and password, valid admin credentials and web/IP address, etc. Additionally, you must be ready with a handy computer and smartphone compatible with your networking device.
Moreover, properly check the power requirements and use the original devices only to ensure seamless operation. After that, install the extender and router at a suitable place where it receives and transmits high-speed signals. For the complete procedure details, jump into the next section.
Three Ways to D-Link DAP-1620 Setup
Generally, there are three methods available for the D-Link DAP-1620 Wi-Fi Range Extender Setup. These methods are the WPS Button method, web interface, and setup via the QRS Mobile app. If you are interested in learning these methods, read the steps below.
D-Link DAP-1620 Range Extender Setup Via Web Browser
- To begin with, power on your networking device.
- After that, connect to the extender’s default wifi network.
- You can also connect to the wired network.
- Further, open any web browser and enter the dlinkap.local web address in the URL bar.
- Instead, you can use the 192.168.0.50 IP address.
- Now, enter your admin password to access the dashboard.
- Then, you reach the configuration page of the DAP-1620.
- Hereon, uplink your range extender and follow the on-screen instructions.
- Next, connect your devices, configure device settings, and set a password for your range extender.
- Then, tap ‘Extender an existing wireless network’ and select the preferred network.
- Otherwise, tap on the ‘Manual’ button and enter the SSID and password of the wifi network you want to connect.
- Tap ‘next’ and customize your wireless settings accordingly.
- Further, you can add wireless to your wired network, configure the admin password, etc.
- Follow the on-screen instructions to complete the D-Link DAP-1620 Setup.
WPS Button Setup Method For the D-Link DAP-1620 Wi-Fi Range Extender Setup
- First of all, plug the DAP-1620 into a wall outlet.
- Wait until the WPS LED blinks amber.
- Now, push the WPS button on your router and extender.
- Wait until the WPS indicator flashes green.
- After that, wait for two minutes and let the LED turn solid green.
- Now, the D-Link DAP-1620 is ready to share and extend the wifi network.
Using the QRS Mobile App For D-Link DAP-1620 Setup
- Initially, install the QRS Mobile app on your smartphone.
- You can also scan the QR code given in the quick installation guide to install it.
- Now, connect the router to the DAP-1620 range extender using its default SSID and password.
- After that, launch the app and access your admin panel.
- Now, tap ‘Start’ and ‘Next’ to continue.
- Hereon, the QRS Mobile app scans for the available wifi networks.
- Select a suitable wifi SSID and enter its password to connect.
- Now, you can also customize these wifi settings as per your preferences.
- Additionally, create an admin password for your device and tap ‘next’.
- Review the summary of the settings and click ‘Save’ to finish the setup.
- For further configuration, follow the in-app instructions.
Finally, this D-Link DAP-1620 Setup guide made you familiar with the extender configuration in different ways. If you want to know more about this device, reach out to us!
FAQs
You can find the WPS button on the front panel of your range extender.
The default username for the D-Link range booster is ‘admin,’ and the password field is left blank.
If the QRS Mobile app doesn’t work, make sure it is the latest version. Further, clear the app cache and disable the security extension or temporary files from the mobile. If you are not able to open it, uninstall and reinstall it.
The D-Link range extender supports none or the WPA2-PSK security type to secure the wifi network.